Best Tv Remote Repeaters 2024 - Top 10 Picks

This is the ultimate buyer's guide to finding the right tv remote repeaters to suit your needs. We review the 10 best tv remote repeaters on the market so you know that your next decision will be a smart one!

When you're trying to select the good tv remote repeaters, there are a lot of factors to consider. This page has everything you need to know in one place.

This guide will help you avoid the pitfalls that come with researching tv remote repeaters.

You don't have to try out every tv remote repeaters to find one that meets your needs. After extensive research and hours of in-person tests, we've found the best tv remote repeaters to be Cable Matters Infrared Remote Extender Cable 10 ft, IR Repeater Kit Cable, IR Extender, USB IR Blaster Cable - 10 Feet. There are a lot of sub-par products out there, but this product is one of the highest quality you'll find. Next best option is BAFX Products - All-in-One Infrared IR Repeater Kit/Remote Control Extender Cable / 1, 2 or 4 Device Contro (1 Device).

Choosing the tv remote repeaters can be a daunting task, especially if you're doing it for the first time. Here's what we recommend based on our extensive research. We've compiled a list of the highest rated tv remote repeaters. The following products are some of the best you can get right now.

List of Top 10 Tv Remote Repeaters

Review of Best Tv Remote Repeaters

1. Cable Matters Infrared Remote Extender Cable 10 ft, IR Repeater Kit Cable, IR Extender, USB IR Blaster Cable - 10 Feet

  • IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV; Blue LED in IR Receiver bulb verifies the signal transmission
  • Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor; Route the infrared remote control extender cable out of sight with a wall mounted TV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
  • Simple installation of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power; USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger
  • Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF); 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote

2. BAFX Products - All-in-One Infrared IR Repeater Kit/Remote Control Extender Cable / 1, 2 or 4 Device Contro (1 Device)

  • STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for.
  • COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!
  • SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the IR receiver on the device you wish to control. Lastly, place the IR receiver end in the line of sight of your remote control (no further than 28' from remote control) and that's it! You're all set!
  • RESISTANT to interference from stray infrared sources such as plasma TV's & CFL lightbulbs! Worried that your plasma TV or CFL bulbs will cause interference with this IR repeater just like your old IR repeater you bought years ago? Worry no more! With our new plasma resistant technology nearly all of these trouble causing stray IR signals are filtered out! No more randomly changing channels or flashing lights caused by your TV or lightbulbs!
  • EXCELLENT MANUFACTURER WARRANTY from BAFX Products. Even though this is extremely inexpensive, BAFX Products stands behind everything we sell or we won't sell it. Your all-in-one IR extender is covered by our 1 year warranty against manufacturing defects and is super easy & simple to claim should the need arise! We also extend Amazon's normal 30 day return period with our 60 day, no hassle, no questions asked return policy. Miss the return window from Amazon? No problem. Just contact BAFX!

3. TNP Wireless IR Repeater Kit Universal Remote Control Infrared IR Transmitter and Receiver with Head Eye IR Blaster Kit Emitter Booster Cable for Remote Control of TV, Cable Box, CD DVD Blu-Ray Player

  • Wireless IR Repeater Kit: Extended range of up to 200m (500 ft) in ideal conditions, overcoming obstacles such as walls and doors. This IR repeater kit gives you control of your entertainment system, tv remote control relay from a distance
  • IR Remote Extender Capabilities: Extend the functionality of your existing remotes, increasing control over volume and channel selection. This is an ideal solution for large households, multi-level homes, or even outdoor control
  • Wide Compatibility: Our IR remote extender is compatible with a broad range of IR-equipped devices, from DVD players and cable boxes to satellite receivers and Hi-Fi stereo systems. It supports IR signal frequency ranges from 20 to 60 KHz
  • Easy Installation: This remote control extender kit includes everything you need for a hassle-free setup: IR receiver, power adapter, IR emitter, and transmitter. No direct line of sight is needed!
  • Sleek and Modern Design: With its minimalistic look, our remote control extender kit streamlines your entertainment center. It's compatible with devices like Chromecast, Alexa, Roku simple remote, and many other IR-controlled devices

4. CERRXIAN Infrared Remote Control Extender Cable, IR Repeater Hidden Cable with IR Signal Receiver & IR Emitter & USB Power Cable (2M/6.5ft)

  • IR REMOTE CONTROL - Simplify your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind cabinet doors and a wall. No more boxes placing on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control!This was a very economical and effective way to make it happen.
  • EASY TO USE - Plug the USB into your TV, set top box or a 5V wall adapter(adapter not included) for supply power, then paste the IR emitter(small end) using it's own adhesive over on the device with an IR sensor you wish to control(up to 10cm/3.9inch).Lastly, place the IR receiver(big end) end in the line of sight of your remote control (up to 10m/ 32ft).
  • WIDE BAND TECHNOLOGY - 20-60KHZ,works on most infrared control devices(not RF)! Suitable for infrared remote control, infrared extender, DVD player, STB box,Cisco,DirecTV,Roku, Sony, Yamaha,etc.
  • EXCELLENT SIGNAL RANGE - 180 degree IR receiving angle provides enough space for your remote control to get the right angle. The remote control signal receives a real-time response and moves forward quickly without delay.
  • HIDDEN DEVICES - Devices that require remote control must be placed where you cannot directly control your remote control. Otherwise, the signal from the remote control and the forwarded remote control signal will be sent to the set-top box at the same time. Signals out of sync can interfere with each other and cause them to stop working.

5. Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black

  • Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector
  • BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit.
  • BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them.
  • Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet.
  • Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)

6. TNP IR Repeater Extender Infrared Remote Control Hidden System Kit - Infrared IR Emitter Blaster Distribution Extension & Receiver Cable for Cable Box Home Theater AV Component Equipment HDTV

  • An ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet for a clean, stylish look
  • IR Repeater system allows you to Control home theater components located behind cabinet doors
  • Included with the system is - IR Receiver (2 inches by 1/2 Inch); Hidden IR Repeater Controller (3 1/2 Inches by 2 Inches); 2 dual IR emitters blaster
  • Convenient IR confirmation LED with dual frequency to support infrared signals from a wider range of IR remote control such as cable box setup box STB; Support up to six emitter output connections
  • Additional IR emitter blaster available for purchase at ASIN: B017LQAKXW; If you need to extend the IR blaster emitter cable, you can use a 3.5mm stereo audio extension cable and a 2.5mm to 3.5mm adapter at one end and a 3.5mm to 2.5mm adapter at the other end

7. St !GIANTMAN USB IR Repeater - Infrared Remote Control Extender Repeater with 1 Emitters, 2 Emitters, 4 Emitters (3M/ 10 FT)

  • High sensitivity: Remote control signal receiving real-time response to fast forward without delay
  • Allows IR signals to pass through solid doors or walls, line-of-sight to the components is not required Confirmation LED built-in to the IR receiver acknowledges receipt of IR commands
  • Easy Setup: This IR Repeater System is easy to use and sets up in minutes
  • 5V USB Power Supply(Adapter not included)
  • Control Audio Video Components in Entertainment Cabinets or Equipment Closets using Existing IR Remote Controls

8. Tunteil IR Remote Control Repeater, Remote Control Repeater Extender Emitter Kit Control up to 8 Hidden A/V Devices Like Cable Boxes, Xbox One, Roku, Apple TV, Nvidia Shield and so on(Black)

  • ★★With 1 IR distribution block,1 receiver which picks up the signal from the remote controller, the receiver is with a convenient IR confirmation LED .
    Small and easy to hide,high sensitivity,broadband remote control.
  • ★★Suitable for most IR control devices,such as:Amplifier,Cable box,
    DVD Player,CD Player,Blu-ray player,Stereo receiver ,Satellite TV receiver and so on.PLEASE NOTE, DOES NOT WORK WITH: Cisco RNG150 RNG150N & RNG250 & Marantz devices.
  • ★★With 6 emitters which is used to send the signals to the A/V components,Kit controls up to 8 devices - Expandable to 12 devices (Additional IR emitters sold separately)
  • ★★12V DC Power Supply(INPUT 100-240VAC,50/60Hz),34-60kHz operating range,3.5mm mini plug.
    Easy to use,Control all same devices by one click ,it needn't turn the contriller to all directions.
  • ★★Lifetime warranty on parts and labor. we provide 7x24 hours service,please feel free let me know if you have any question.

9. ICESPRING Infrared Repeater System IR Repeater Kit Control Up to 10 Devices Hidden IR System Infrared Remote Control Extender Kit

  • Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices - Expandable to 12 devices
  • IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc
  • IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet
  • High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent. CFL friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments
  • Note: plasma displays emit IR frequencies during use and may cause interference. It is advised to distance the IT receiver from any plasma TV or display ability to control multiple appliances at various locations up to 10 m1. Connect IR receiver to any of the 3.5 mm ports on the IR transceiver,IF 2 or more IR receiver are connected, the distance between 2 IR receiver should not be less than 6 m to avoid interference

10. Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV; Red LED in IR Receiver bulb verifies the signal transmission,Operating range:20-60HZ
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor; Route the cable out of sight with a wall mounted HDTV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
  • {SIMPLE INSTALLATION} of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF); 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power; Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will interfere with each other and cause them

Last update on 2024-06-17 / Affiliate links / Images from Amazon Product Advertising API

Add Comment