Best Remote Infrared Sensor For Cable Box 2024 - Top 10 Picks

This is the ultimate buyer's guide to finding the right remote infrared sensor for cable box to suit your needs. We review the 10 best remote infrared sensor for cable box on the market so you know that your next decision will be a smart one!

When you're trying to select the good remote infrared sensor for cable box, there are a lot of factors to consider. This page has everything you need to know in one place.

This guide will help you avoid the pitfalls that come with researching remote infrared sensor for cable box.

You don't have to try out every remote infrared sensor for cable box to find one that meets your needs. After extensive research and hours of in-person tests, we've found the best remote infrared sensor for cable box to be Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT). There are a lot of sub-par products out there, but this product is one of the highest quality you'll find. Next best option is RuiLing 1-Pack 3.5mm IR Infrared Emission Line Remote Control Receiver Extension Cord Cable 1m.

Choosing the remote infrared sensor for cable box can be a daunting task, especially if you're doing it for the first time. Here's what we recommend based on our extensive research. We've compiled a list of the highest rated remote infrared sensor for cable box. The following products are some of the best you can get right now.

List of Top 10 Remote Infrared Sensor For Cable Box

Review of Best Remote Infrared Sensor For Cable Box

1. Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV; Red LED in IR Receiver bulb verifies the signal transmission,Operating range:20-60HZ
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor; Route the cable out of sight with a wall mounted HDTV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
  • {SIMPLE INSTALLATION} of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF); 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power; Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will interfere with each other and cause them

2. RuiLing 1-Pack 3.5mm IR Infrared Emission Line Remote Control Receiver Extension Cord Cable 1m

  • Package: 1 piece remote control extenders, light-weight, small-size and solid, commonly used when your receiver is hidden away in a cupboard, in a different room, or behind your TV.
  • Connector: Come with a standard universal 3.5mm jack male plug at one end and an IR emitter at the other, 1m cable long enough to position the sensor in anywhere in your house.
  • High Sensitivity: Real time transmission without any delay with its high sensitivity sensor. 38kHz frequency range, compatible with various of electronic products and appliances.
  • Purpose: Used with an IR Repeater kit to control a device, allow you to extend remote control ability to a location that the remote control or IR repeater system block can't reach.
  • Application: Allows you to control A/V component by the existing IR controller, such as set-top box, stereo receiver, car audio system, hard disk player, Satellite TV receiver, CD player, DVD player, Bluray player or other components.

3. BAFX Products - All-in-One Infrared IR Repeater Kit/Remote Control Extender Cable / 1, 2 or 4 Device Contro (1 Device)

  • STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for.
  • COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!
  • SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the IR receiver on the device you wish to control. Lastly, place the IR receiver end in the line of sight of your remote control (no further than 28' from remote control) and that's it! You're all set!
  • RESISTANT to interference from stray infrared sources such as plasma TV's & CFL lightbulbs! Worried that your plasma TV or CFL bulbs will cause interference with this IR repeater just like your old IR repeater you bought years ago? Worry no more! With our new plasma resistant technology nearly all of these trouble causing stray IR signals are filtered out! No more randomly changing channels or flashing lights caused by your TV or lightbulbs!
  • EXCELLENT MANUFACTURER WARRANTY from BAFX Products. Even though this is extremely inexpensive, BAFX Products stands behind everything we sell or we won't sell it. Your all-in-one IR extender is covered by our 1 year warranty against manufacturing defects and is super easy & simple to claim should the need arise! We also extend Amazon's normal 30 day return period with our 60 day, no hassle, no questions asked return policy. Miss the return window from Amazon? No problem. Just contact BAFX!

4. IR Receiver Cable -10FT Infrared Remote Control Repeater Extender Cable with 3.5mm Jack Plug IR Emitter for HD DVR Cisco Explorer Verizon FiOS and Other STB Set Top Boxes - 2 Pack

  • ★ KIND TIPS - This 3.5mm to IR remote control extender cable is not truly universal, it has two requirements (ir frequency and input port) and it cannot work with all brands of cable box/set-top box, please think twice before ordering! If our product cannot work for you, please Message us immediately for full re-fu-nd!
  • ★ GET A MORE CLEANER OUTLOOK - This IR extender allows you to hide your cable box, set-top box, receiver, amp, Roku & other IR controlled devices behind closed doors, so not boxes sitting out on the shelf or leaving cabinet doors opened when watching TV but still you can use the remote control functionally! Give your living space a more refined and streamlined look in a second!
  • ★ UNIVERSAL COMPATIBILITY - We have tested our IR repeater kits with thousands of IR devices, and the result is this ir extender can work with all IR devices with the38-56KHz frequency of 38-56KHz and has a 3.5mm IR port (need to be met at the same time), such as Charter, Cisco, Logitech, Pioneer, DirecTV, Dish Network, Marantz, Motorola, Roku, Scientific Atlanta, Sony, Spectrum, Verizon, U-Verse, Yamaha and Comcast Cable Boxes, Set-top Boxes, DVRs, Harman Kardan Soundbar, etc.
  • ★ EASY SETTING - Our ir blaster does not required power or anything else to work, just plug the 3.5mm end into the 3.5mm IR port of your cable box then stick the transmitter head (comes with adhesive) onto anywhere you want, and start to enjoy now! If your device does not have a 3.5mm IR port, please order the USB version instead of this one!
  • ★ LONG DISTANT CONTROL - 10 feet long ir emitter allows you to extend the infrared signal into 49.21ft by just simply plug in, remote control horizontally within 45 degrees, you can even remotely turn on/off TV in the living room from your bedroom, a perfect help for everyone!

5. CERRXIAN Infrared Remote Control Extender Cable, IR Repeater Hidden Cable with IR Signal Receiver & IR Emitter & USB Power Cable (2M/6.5ft)

  • IR REMOTE CONTROL - Simplify your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind cabinet doors and a wall. No more boxes placing on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control!This was a very economical and effective way to make it happen.
  • EASY TO USE - Plug the USB into your TV, set top box or a 5V wall adapter(adapter not included) for supply power, then paste the IR emitter(small end) using it's own adhesive over on the device with an IR sensor you wish to control(up to 10cm/3.9inch).Lastly, place the IR receiver(big end) end in the line of sight of your remote control (up to 10m/ 32ft).
  • WIDE BAND TECHNOLOGY - 20-60KHZ,works on most infrared control devices(not RF)! Suitable for infrared remote control, infrared extender, DVD player, STB box,Cisco,DirecTV,Roku, Sony, Yamaha,etc.
  • EXCELLENT SIGNAL RANGE - 180 degree IR receiving angle provides enough space for your remote control to get the right angle. The remote control signal receives a real-time response and moves forward quickly without delay.
  • HIDDEN DEVICES - Devices that require remote control must be placed where you cannot directly control your remote control. Otherwise, the signal from the remote control and the forwarded remote control signal will be sent to the set-top box at the same time. Signals out of sync can interfere with each other and cause them to stop working.

6. BAFX Products - RF Wireless IR Repeater Kit/Infrared Remote Control Extender Kit; Hide Your Cable Box Out of Sight; No Wires to Run

  • Hide your IR remote controlled devices completely out of sight! In another room, in the cabinet or wherever you can imagine!
  • Does your remote control stop working if your cable box is 20' away but you want to put the cable box downstairs? Not a problem with our wireless remote control extender!
  • Suitable for most homes 3-5,000 SQFT or less. Our wireless IR extender can span 50-300ft, depending on your homes contstruction which can reduce the distance it may span.
  • Sit and change channels on the cable box while the box is in the basement and your upstairs.
  • Simple to follow setup video, helpful technical support and an awesome, 1 Year manufacturer warranty from BAFX Products!

7. Inteset 38-56 kHz Wideband Infrared (IR) Receiver Extender Cable for Cable Boxes, DVR's & STB's. Check Compatibility.

  • WORKS ONLY w/CABLE Set Top Boxes (STB). Please check your device to be sure you have an active 3.5 mini input port labeled "IR IN". Contact us if you have any questions about compatibility before you buy.
  • 20-25 ft range from remote control to IR receiver. High Immunity to ambient light and noise
  • Highly Reliable with high sensitivity for wide range. Works great with our INT-422 Remote
  • 6 ft shielded cable, 3.5 mini plated stereo plug. Tip-VCC 5V, Center-Data, Lower-Ground
  • Works with all Universal Remotes and most Cable Boxes with an active IR IN jack

8. Hide Your Cable Box with Our 38/56kHz IR Extender. Please Check Compatibility List

  • Works with Verizon QIP7xxx and QIP6xxx series, Explorer, Cisco, PACE, Motorola, April and DTA Set Top Boxes
  • Will NOT work with SA 4000HDC series,4200/HDC,4240,4250/HDC,8300/HD,8240/8260HDC box, A/V Receivers,TVs or IR Repeater kits

9. Inteset 38 kHz Infrared Receiver Extender Cable for HD DVR's & STB's- Check Compatibility

  • PLEASE CHECK with your cable company to be sure you have an active 3.5 mini input port labeled "IR IN" on your cable box. . Contact us if you have any questions about compatibility before you buy. WORKS ONLY w/CABLE Set Top Boxes (STB).
  • 25 ft range from remote control to IR receiver. High Immunity to ambient light and noise. If it only works a short distance away then it is not compatible and should not be used.
  • Highly Reliable with high sensitivity for wide range. Works great with our INT-422 Remote. Works only with certain devices. Be sure to check wit us if you have any questions.
  • 6 ft shielded cable, 3.5 mini plated stereo plug.
  • Works with all Universal Remotes and many cable boxes with an IR IN jack. Be sure to see all of the exceptions listed below.

10. Sensor Bar Wired Receiver Signal Line USB Plug Replacement Remote Control 4k Cable

  • Ideal replacement for the original sensor bar. This is a must have for the game
  • Comes with adhesive for easy installation on your TV, monitor, or smooth surface
  • It can receive signals from the console and is the perfect replacement for a broken river
  • Also included is a 7 foot cable to conveniently position the sensor bar
  • Easy to plug and play, adjust sensor adjustment

Last update on 2024-04-26 / Affiliate links / Images from Amazon Product Advertising API

Add Comment