Best Oscilloscope Handheld 2024 - Top 10 Picks

This is the ultimate buyer's guide to finding the right oscilloscope handheld to suit your needs. We review the 10 best oscilloscope handheld on the market so you know that your next decision will be a smart one!

When you're trying to select the good oscilloscope handheld, there are a lot of factors to consider. This page has everything you need to know in one place.

This guide will help you avoid the pitfalls that come with researching oscilloscope handheld.

You don't have to try out every oscilloscope handheld to find one that meets your needs. After extensive research and hours of in-person tests, we've found the best oscilloscope handheld to be FNIRSI DSO152 Oscilloscope - 2.8" TFT Handheld Digital Oscilloscope Kit Portable Automotive Oscilloscope, 2.5MS/s High Sampling Rate, 200KHz Bandwidth, Trigger Function Auto/Nomal/Single. There are a lot of sub-par products out there, but this product is one of the highest quality you'll find. Next best option is ZOTEK ZT-702S 2 in 1 Handheld Digital Automotive Oscilloscope Multimeter, Diode Tester,multimeter auto rangin48MSa/s High Sampling Rate,Amp Ohm Volt Meter Tester、Voltage/Current Test.

Choosing the oscilloscope handheld can be a daunting task, especially if you're doing it for the first time. Here's what we recommend based on our extensive research. We've compiled a list of the highest rated oscilloscope handheld. The following products are some of the best you can get right now.

List of Top 10 Oscilloscope Handheld

Review of Best Oscilloscope Handheld

1. FNIRSI DSO152 Oscilloscope - 2.8" TFT Handheld Digital Oscilloscope Kit Portable Automotive Oscilloscope, 2.5MS/s High Sampling Rate, 200KHz Bandwidth, Trigger Function Auto/Nomal/Single

  • 【Faster sampling speed】FNIRSI DSO152 mini oscilloscope has a real-time sampling rate of 2.5MS/s and a 200KHz bandwidth. The 10x probe can measure up to 800VPP, which is equivalent to 280V AC. Voltages up to ±400V can be measured.
  • 【Professional Designed 】Features with full trigger function (AUTO/Normal/Single). Works perfectly for both periodic analog signals and aperiodic digital signals. 2.8-inch high-definition LCD display screen, a resolution of 320*240, Type-C interface supports data transmission and charging.support interface to update firmware directly.
  • 【Portable Mini Oscilloscope】Pocket oscilloscope is an Assembled finished Machine, lightweight and easy to carry, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time. Applicable to the maintenance industry and R&D education industry. The highly practical oscilloscope can meet your daily testing needs.
  • 【Easy Measuring】Equipped with efficient one-key AUTO setting of all parameters, the measured waveform can be displayed without cumbersome adjustment. Long press the AUTO button to quickly calibrate the baseline,fast measurement of waveforms, improve work efficiency.
  • 【Longer Battery Life】Automotive oscilloscope has a built-in 1000mAh high-quality lithium battery, which can be used continuously for about 4 hours after being fully charged. At the same time, it is equipped with a type-c charging cable, which can also be used while charging, which is very convenient.

2. ZOTEK ZT-702S 2 in 1 Handheld Digital Automotive Oscilloscope Multimeter, Diode Tester,multimeter auto rangin48MSa/s High Sampling Rate,Amp Ohm Volt Meter Tester、Voltage/Current Test

  • 2.8-inch IPS full-view color screen oscilloscope multimeter:Trigger Function Auto/Nomal/Single, ±400V input, automatic measurement scan, 200mv/div-10v/div vertical sensitivity,8/50ns/div-20S/div horizontal scan range, 20ppm time base Accuracy digital oscilloscope
  • Dual mode design of oscilloscope and multimeter: one-button switch mode 、automatic obtain waveform, time base calibration, data storage, data export, language selection, shutdown time setting, backlight adjustable, data transmission port, 3V-1kHZ square wave output, memory and other functions, easy to operate, Improve work efficiency. digital oscilloscope multimeter widely used in automotive, industrial equipment, sensors, heavy electrical equipment, finishing and low voltage systems.
  • Multimeter Tester Mode: 9999 counts; AC voltage: 0-750V; DC voltage: 0-999.9V; DC/AC current: 0-9.999A; resistance: 0-99.99MΩ; capacitance: 0-9.999mF ; Frequency: 0-99.99kHZ; Temperature: -20°C-1000°C, diode, continuity measurement. It is suitable for voltage tester instrument of household, school, shopping mall, and laboratory circuit system, and can also be used for digital multimeter of socket, switch, lamp and low-voltage circuit.
  • Safety overload protection:conforms to CTA III 1000V, CTA II 600V safety level, meets CE certification requirements, A/D high sampling conversion, 200mA-10A double ceramic fuse, ABS+TPE double injection molding process, strong Durable.
  • A multi-purpose Automotive oscilloscope multimeter equipped with a 1X2000mAh power supply and USB charging cable. The charging and data transmission channels share a TP-C interface, which can also be used during charging. Equipped with a 4V/1KHz square wave signal generator, product size: 6.97-3.51-1.57In.

3. FNIRSI 2C23T 3 in 1 Handheld Oscilloscope Multimeter DDS Generator, 2 Channels, 10MHz Bandwidth, 50MSa/s Sampling Rate, 10000 Counts, Voltage, Current, Capacitor, Resistor, Diode Test

  • 【Oscilloscope Mode】2 channel handheld oscilloscope, 10MHz bandwidth, real-time sampling rate 50MSa/s, record depth 32kb, maximum measurement voltage ±400V, automatic measurement function, trigger function auto/normal/single, 200mv/div-10v/div vertical sensitivity, support waveform image storage and export.
  • 【Multimeter Mode】4-digit 10000 Counts. AC Voltage: 0-750V, DC Voltage: 0-999.9V, DC/AC Current: 0-9.999A, Resistance: 0-99.99MΩ, Capacitance: 0-99.99mF, Temperature: -55°C-1300°C/-67~2372℉, Diode, Continuity Measurement. An ideal multi-function meter for professionals, factories, schools, hobbyists or home use.
  • 【Signal Generator】The maximum waveform output frequency can reach 2MHz and a step of 1Hz, and can output seven waveforms including sine, square, triangle, full, half, noise, and DC.
  • 【Excellent Design】The Oscilloscope adopts FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, adopts 2.8-inch 320*240 resolution HD LCD display, built-in 3000mAh rechargeable Li-ion battery, standby time up to 6H, Type-C interface supports 5V/1A power adapter charging.
  • 【Save function】one-click save, screening function. You can upload the saved image by connecting to PC via Type-C. You can easily compare the waveforms by displaying the reference waveform and the measured waveform on the same screen.

4. FNIRSI 1013D Plus Oscilloscope - Portable Handheld Tablet Oscilloscope with 100X High Voltage Probe, 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate 7" TFT LCD Touch Screen

  • Professional Designed: FNIRSI oscilloscope has a real-time sampling rate of up to 1GSA/S and an analog bandwidth of 100MHZ * 2. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.
  • Highly Performance: 7 inches, 800 * 480 resolution, bright colors and high contrast. Ultra-thin and easy to carry. Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V. 6000mAh high-performance lithium battery, can be used continuously for 4 hours after fully charged.
  • Easy to Operate: Equipped with efficient one-button automatic device. One-click waveform saving and screenshots. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc
  • Easily Measuring : Capacitive screen touch & gesture operation, cursor measurement function, when manually reading amplitude-frequency parameters, you do not need to read the background scale unit and quantity, and you can directly get the peak-to-peak value and frequency without conversion.
  • Lissajous Graphic Display & FFT Viewing: Lissajous graphic display function can be used to compare the amplitude, frequency and phase of the two sets of signals. FFT viewing function can roughly estimation of the harmonic content of the signal.

5. 【Upgraded Model 2*P6100 Probe】 FNIRSI 3 in1 Oscilloscope/Multimeter/DDS Signal Generator with 2 Channels, 10MHz Bandwidth, 50MSa/s Sampling Rate, 10000 Counts, Voltage, Current, Capacitor, Resistor

  • 💠💠【3 in 1 Multifuctional & Handheld】The FNIRSI-2C23T has combined the functions of dual channels oscilloscope, digital multimeter and signal generator. It is handheld and easy to carry, easy for people working in maintenance and engineering industry.Whether used by professionals, factories, schools, enthusiasts, or families, it is an ideal multi-functional instrument.                                                             
  • 💠💠【Oscilloscope Mode】2 channel handheld oscilloscope, 10MHz bandwidth, real-time sampling rate 50MSa/s, record depth 32kb, maximum measurement voltage ±400V, automatic measurement function, trigger function auto/normal/single, 200mv/div-10v/div vertical sensitivity, support waveform image storage and export.                                                              
  • 💠💠【Multimeter Mode】4-digit 10000 Counts. AC Voltage: 0-750V, DC Voltage: 0-999.9V, DC/AC Current: 0-9.999A, Resistance: 0-99.99MΩ, Capacitance: 0-99.99mF, Temperature: -55°C-1300°C/-67~2372℉, Diode, Continuity Measurement. An ideal multi-function meter for professionals, factories, schools, hobbyists or home use.                                                                                                                                   
  • 💠💠【Signal Generator Mode】The maximum waveform output frequency can reach 2MHz and a step of 1Hz, and can output seven waveforms including sine, square, triangle, full, half, noise, and DC. Equipped with a built-in DDS function signal generator, it can output 7 types of function signals, with a maximum output of 2MHz for all signals and a step of 1Hz; The output frequency, amplitude, and duty cycle are adjustable.                                                                                                                  
  • 💠💠【EXQUISITE Design with Large Capacity Battery】The Oscilloscope applys FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, and is equipped with 2.8-inch 320*240 resolution HD LCD display, built-in rechargeable battery up to 3000mAH, standby time up to 6H, Type-C interface supports 5V/1A power adapter charging.                                                                                                               

6. HANMATEK Handheld Digital Oscilloscope 50Mhz Bandwidth with 2 Channels HO52 3.5"TFT Mini Oscilloscope, 2 in 1 Oscilloscope and Multimeter, Backlit Screen, Auto-Calibration Function, Memory Function

  • 【Scope Mode】: 1. The waveform refresh rate is up to 10000wfms / s; 2. Oscilloscope 2 channel input, bandwidth up to 50MHZ, better signal reception. Real-time sampling rate 250MSa / s, recording length up to 8k dots; 3. Cursor measurement function; 4. 7 kinds of automatic measurement functions; 5. XY function; 6. One key automatic setting function, convenient for detecting and debugging.
  • 【Meter Mode】: 4 1/2 digits of the true effective value. 1. Standard voltage, current, resistance, diode, continuity, capacitance test; 2. Auto range function, convenient for testing and debugging; 3. The maximum input voltage is AC 750V, DC 1000V; 4. Independent multimeter and oscilloscope input; 5. Reading the wait function; 6. Relative measurement function.
  • 【Portable Oscilloscopes】: USB Type-C interface supports not only power bank power supply, but also adapter charging and top computer connection. The computer can read saved images or CSV waveforms, which is useful for later viewing and analyzing waveforms or for sharing waveform data.
  • 【Save Function】: Can save 4 groups of settings, 4 groups of reference waveforms, 4 images, 4 groups of waveforms in CSV format. The reference waveform can be displayed on the same screen as the measured waveform for convenient comparison of the waveform. Self-calibration function. Up to 6 automatic measurements can be displayed simultaneously on the screen.
  • 【High Quality After-Sales Service】: Weight only 2.6lb, easy to carry, small size, easy to operate. The automotive oscilloscope. Suitable for students science lab, engineers, and scientists, machine repair, factories, etc. It is a good lab scope automotive tool. lifetime technical support, any product question please contact us.

7. Hantek 2D72 Handheld Oscilloscope 70MHz Waveform Generator Multimeter 3 in 1 Multifunction Tester 2CH+AFG+DMM Comes with 2 Probes

  • Function: Oscilloscope+Multimeter+Waveform Generator; 70 MHz Handheld Digital Oscilloscope with 2 channels -- Sample Rate Range 250MSa/s(Single-channel), 125MSa/s(Dual-channel).
  • Simplify operation, convenient to use: 250M Sampling rate, 70MHZ Bandwidth. 10MV-10V Vertical resolution; Auto automatic measuring function; Key tone settings, Adjustable backlight brightness, Backlight, duration and auto power off time. Digital voltmeter function, Cursor measurement, reference waveform,waveform Storage function.
  • Multifunction Digital Multimeter Function, High sensitivity and accuracy, showing clear, stronganti-overload capability, easy to carry. Digital multimeter which can be used to measure AC/DC voltage/current, resistance, diode,capacitance, on-off test.
  • We offer 1 year warranty with 30 days worry-free return, so 100% satisfaction and zero hassle returns guaranteed. Please don't hesitate to contact us when you use the item.

8. 【Upgraded DSO153 Plus 10X PRODE】FNIRSI 2 in 1 Oscilloscope/DDS Signal Generator, Digital Handheld Automotive Oscilloscope 2.8 inch TFT, 1MHz Bandwidth, 5MS/s Sampling Rate, Auto/Nomal/Single Trigger

  • ✅✅【UPGRADED VERSION OF DSO152】 FNIRSI DSO153 is slightly more expensive than the previous DSO152, but it was equipped with higher functionalities. It is not only upgraded to 1MHz Bandwidth, 5MS/s Sampling Rate, 500ns-20S time base range, but with the 10X prode comes with the package, voltages up to ±400V can be measured.                                                                          
  • ✅✅【2 IN1 DDS SIGNAL GENERATOR】FNIRSI DSO153 is not only an digital oscilloscope, but it also has the functionality of signal generator combined. It could output and display 14 different waveforms including sine, square, triangle, full, half, noise, and DC,etc, and the maximum waveform output frequency is up to 10KHz. It can be used freely for both periodic analog signals and non periodic digital signals.                                                                          
  • ✅✅【QUICK MEASUREMENT】With one-key AUTO setting of all parameters, it can quick measure waveform. Your working efficiency would be highly improved. Only need to long press the AUTO button, the baseline would be quickly calibrated.                                                                          
  • ✅✅【FASHIONABLE DESIGN】Testing tools need to be cooler than before. This is the concept we live up to when we designed our product.The FNIRSI DSO153 Oscilloscope is equipped with built-in 1000mAH battery. It could continually work for 4 hours after fully charged. You could use it indoor or outdoor without worrying that the battery is running out.                                                                          
  • ✅✅【Portable&lightweight】The size of this oscilloscope is 99x68.3x19.5mm, which makes it lightweight and easy to carry. No assembling process is needed because it is assembled completely.

9. FNIRSI DSO153 2 in 1 Handheld Oscilloscope/DDS Signal Generator, Digital Portable Automotive Oscilloscope with 2.8 inch TFT, 1MHz Bandwidth, 5MS/s Sampling Rate, Trigger Function Auto/Nomal/Single

  • 【Upgraded Version】Oscilloscope and DDS signal generator dual mode with 1MHz High bandwidth, 5MS/s high sampling rate, 500ns-20S time base range, and can measure voltages up to ±400V.
  • 【DDS Signal Generator】The DDS signal generator can output 14 waveforms, and the maximum waveform output frequency is up to 10KHz.
  • 【Easy Measurement】The handheld oscilloscope is equipped with intelligent one-click automatic configuration function. Long press the AUTO button to quickly calibrate the baseline and display the measurement waveform without complicated debugging.
  • 【Professional Design】The automotive oscilloscope is equipped with a 2.8-inch High-definition LCD display, 320*240 resolution, Auto/Normal/Single trigger function, suitable for periodic analog signals and non-periodic digital signals.
  • 【Rechargeable lithium battery】The portable oscilloscope has a built-in 1000mAh high-quality lithium battery, supports Type-C interface charging, and has a battery life of about 4 hours.

10. FNIRSI 2C53P Handheld Tablet Oscilloscope Multimeter DDS Signal Generator 3 in 1, 2CH Automotive Oscilloscope Multimeters with 50Mhz Bandwidth, 19999 Counts, 250MS/s Sampling, 4.3 inch Touch Screen

  • 【2 channel oscilloscope multimeter】Handheld oscilloscope has 250MS/s high sampling rate, 50Mhz high bandwidth. Multimeter 19999 counts, 5 measuring values, maximum and minimum real -time display. 4.3-inch IPS ultra-high definition touch screen, 480*272 high resolution.
  • 【Signal generator】The DDS signal generator can output 12 waveforms, the maximum waveform output frequency can reach 10MHz.FPGA+MCU+ADC hardware structure can ensure a strong waveform capture function. Support waveform preservation, view and export analysis.
  • 【Efficiency improvement】Automotive oscilloscope has efficient one-key AUTO, quickly measure, simplify operations. Support automatic/normal/single trigger function.Tablet Oscilloscope suitable for periodic analog signals and non -periodic digital signals.
  • 【Comprehensive analysis】X-Y mode can be used to compare the phase, amplitude and frequency of two sets of signals. FFT spectrum analysis can estimate the harmonic content and better handle complex signals.
  • 【Long-lasting battery life】The digital oscilloscope has a built-in 4000mAh lithium battery with a battery life of about 4 hours, and supports Type-C interface charging to ensure uninterrupted work.

Last update on 2024-07-15 / Affiliate links / Images from Amazon Product Advertising API

Add Comment