Best Miter Saws For Crown Molding 2024 - Top 10 Picks

This is the ultimate buyer's guide to finding the right miter saws for crown molding to suit your needs. We review the 10 best miter saws for crown molding on the market so you know that your next decision will be a smart one!

When you're trying to select the good miter saws for crown molding, there are a lot of factors to consider. This page has everything you need to know in one place.

This guide will help you avoid the pitfalls that come with researching miter saws for crown molding.

You don't have to try out every miter saws for crown molding to find one that meets your needs. After extensive research and hours of in-person tests, we've found the best miter saws for crown molding to be DEWALT Miter Saw Crown Stops (DW7084). There are a lot of sub-par products out there, but this product is one of the highest quality you'll find. Next best option is Milescraft 1405 Crown45 - Crown Molding Tool, Yellow.

Choosing the miter saws for crown molding can be a daunting task, especially if you're doing it for the first time. Here's what we recommend based on our extensive research. We've compiled a list of the highest rated miter saws for crown molding. The following products are some of the best you can get right now.

List of Top 10 Miter Saws For Crown Molding

Review of Best Miter Saws For Crown Molding

1. DEWALT Miter Saw Crown Stops (DW7084)

  • Miter saw crow stop accurately positions crown molding vertically against the saw fence
  • Accurately positions crown molding vertically against the saw fence
  • Tough, steel construction

2. Milescraft 1405 Crown45 - Crown Molding Tool, Yellow

  • Compact design works with most miter saws
  • Makes right-side-up cutting of 2″ to 5-1/2″ Crown molding
  • Supports Crown molding between 2″ to 5-1/2″
  • Adjustable angle setting with angle finders for creating common molding spring angles (38°, 45° and 52°)
  • Saw blade enters the material from the front

3. Metabo HPT | Compound Miter Saw | 10-Inch | Single Bevel | 15-Amp Motor | 0-52° Miter Angle Range | 0-45° Bevel Range | Large Table | 10" 24T TCT Miter Saw Blade | C10FCGS

  • MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
  • LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
  • MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
  • BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
  • LARGE TABLE: Offers better material support with vice clamping system to secure work piece

4. BOSCH MS1233 Crown Stop Kit for BOSCH Miter Saws, Includes Mounting Knobs and Hardware

  • Allows crown molding to be nested against fence for simple miter cuts
  • Easily positioned out of the way on the tool when not in use
  • Kit Includes: Crown Stops (Left and Right), Mounting Knobs and Hardware

5. NXPOXS Replacement DW7084 Crown Moulding Stop for DEWALT Miter Saw DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718

  • These replacement Crown Stops are designed to fit for DeWalt miter saw DWS779 DWS780 DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718
  • Easy to adjust, strong and ridged. Replace for DEWALT DW7084.
  • Package include: 2 crown stops,one for each side of the blade, 2 screw knob, 2 nut clips.
  • Measures 6-1/2-x-4-1/2 inches.
  • These crown stops accurately position crown molding vertically against the saw fence.

6. Miter Saw Crown Stops DW7084 Fits DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718 Miter Saw,Crown Moulding Stop Cutting Tool

  • Easy to adjust, strong and ridged
  • These crown stops accurately position crown molding vertically against the saw fence.
  • 2 crown stops,2 screw knob, 2 nut clips.
  • fits miter saw DWS779 DWS780 DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718

7. Miter Saw Protractor, Professional Miter Angle Finder for Woodworking Replaces the Model #505P-7 Miter Protractor Angle Finder with Measuring Rulers for Carpentry, Crown Molding Tool, Baseboard

  • PRECISE MEASUREMENT - This miter saw protractor angle finder is specifically designed to ensure a correct and precise miter angle finder with no effort. The miter saw protractor could provide you the exact angle you need (inside or outside corners) to make your perfect trim for crown molding tool, baseboard molding and more
  • FRIENDLY DESIGN - LUVRD professional miter saw protractor is not only an excellent replacement for 505p-7 miter saw protractor angle finder corner crown molding tool, but also a measuring rule in inches for construction
  • SUPERIOR QUALITY AND DURABILITY - This trig crown molding jig angle finder is durable and stronger than other pvc plastic miter angle gauge because it is made of high-quality ABS. Moreover, The miter saw protractor is resistant to scratch for daily use
  • EASY TO USE - Owing to the adjustable and collapsible design, not only is this miter saw protractor angle finder easy to use, but also convenient to carry or store and feature a one-handed operation with a unique tightening mechanism
  • UNCONDITIONAL WARRANTY - LUVRD focuses on construction accessories, and we stand by our carpenter protractor, brings better alternatives for you in the miter saw protractor for woodworking. Welcome to find us with any product-related queries on buyer message

8. Bench Dog 10-027 Polymer Crown-Cut Crown Molding Cutting Jig

  • Crown-Cut crown molding cutting jig.
  • The safest and easiest way to cut crown molding.
  • Eliminates trial and error.
  • Made from durable polymer in the USA.
  • Fits all 10" and larger miter saws.

9. General Tools Crown King Molding Cutting Jig #881 with Protractor, Yellow

  • 4 EASY STEPS: Perfectly mitered corner joints in four easy steps.
  • ELIMINATE TRIAL AND ERROR: Makes accurately cutting crown molding a snap, eliminating trial and error and saving time and money.
  • PROFESSIONAL GRADE JOINTS: Cut perfectly mitered interior and exterior corner joints.
  • MULTIPLE ANGLES: 45° spring angle crown molding jig with adapter for 52° and 38° angles.
  • ELIMINATES: Difficult angle calculations, coping of joints or compound-angle cutting.

10. Skil 10" Dual Bevel Sliding Compound Miter Saw - MS6305-00

  • POWERFUL 15 AMP MOTOR - Delivers 4,800 RPM for quick, detailed cuts
  • DUAL BEVEL – Perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right
  • LED SHADOW LINE - Provides high precision cuts with greater accuracy than lasers
  • 2x12 CUTTING CAPACITY – Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees
  • CUTS AT COMMON ANGLES - Cuts up to 50 degrees left and right with 11 positive stops at most used angles

Last update on 2024-05-18 / Affiliate links / Images from Amazon Product Advertising API

Add Comment