Best F150 Bed Cover 2023 - Top 10 Picks

This is the ultimate buyer's guide to finding the right f150 bed cover to suit your needs. We review the 10 best f150 bed cover on the market so you know that your next decision will be a smart one!

When you're trying to select the good f150 bed cover, there are a lot of factors to consider. This page has everything you need to know in one place.

This guide will help you avoid the pitfalls that come with researching f150 bed cover.

You don't have to try out every f150 bed cover to find one that meets your needs. After extensive research and hours of in-person tests, we've found the best f150 bed cover to be Tyger Auto T1 Soft Roll Up Truck Bed Tonneau Cover Compatible with 2015-2020 Ford F-150 | Styleside 5.5' Bed | TG-BC1F9029. There are a lot of sub-par products out there, but this product is one of the highest quality you'll find. Next best option is Gator EFX Hard Tri-Fold Truck Bed Tonneau Cover | GC24019 | Fits 2015 - 2020 Ford F-150 5' 7" Bed (67.1").

Choosing the f150 bed cover can be a daunting task, especially if you're doing it for the first time. Here's what we recommend based on our extensive research. We've compiled a list of the highest rated f150 bed cover. The following products are some of the best you can get right now.

List of Top 10 F150 Bed Cover

Review of Best F150 Bed Cover

1. Tyger Auto T1 Soft Roll Up Truck Bed Tonneau Cover Compatible with 2015-2020 Ford F-150 | Styleside 5.5' Bed | TG-BC1F9029

  • Cover appears a little short : Make sure side rails are positioned properly, not too far from the tailgate, Move the whole cover assembly towards the tailgate, while making sure it's properly sealed at the front. Some species truck models have lower front bed rail. Apply front seal strip provided to the front bed rail to seal the gap
  • Comes with dual coated 24oz marine grade vinyl top, heavy duty aluminum powder coated side rails and clamps. Built-in horizontal crossbars offer support when cover is lying flat and roll up with the cover providing full bed access.
  • Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Also comes with adjustable tension system on the end of the side rails to keep the cover tight and wrinkle free.
  • Easy No-Drilling installation with the provided instruction and hardware. (Small holes will need to be cut for vehicle equipped with Over-the-Bedrail bedliner to secure the clamps; Works with Under-the-Bedrail bedliner without modification.)
  • TYGER Limited Lifetime warranty! (Please measure your truck bed size before ordering. We accept returns, however customer will assume the return shipping cost if ordered wrong.)

2. Gator EFX Hard Tri-Fold Truck Bed Tonneau Cover | GC24019 | Fits 2015 - 2020 Ford F-150 5' 7" Bed (67.1")

  • Fits 2015 - 2020 Ford F-150 5' 7" Bed (67.1")
  • TOUGH TRUCK BED PROTECTION | The Gator EFX Hard Tri-Fold is constructed of heavy-duty aluminum panels that automatically lock when closed. Panels are coated with a scratch-resistant, UV-protective, black powder coat finish
  • EASY INSTALL & LOW-PROFILE DESIGN | The EFX tonneau cover can easily be installed in less than 30 minutes, without the use of tools or need for drilling. EFX sits flush with your truck bed, providing a stylish low-profile look
  • WEATHER PROTECTION | Gator EFX provides an integrated water management system to keep the rain, snow, dirt and dust out of your truck bed. EFX's unique seal design channels the element out of your truck bed, providing superior bed protection
  • 3-YEAR WARRANTY | The Gator EFX Hard Folding cover is backed by a 3-year warranty, and is supported by our US-based customer service team. If anything goes wrong with your cover, our tonneau cover experts are at your service and ready to help!

3. MOSTPLUS Quad Fold Soft Truck Bed Tonneau Cover On Top Compatible for 2015-2022 Ford F150 F-150 Bed Fourth Fold Styleside (5.5 FT Feet Bed)

  • Truck bed Compatible for: 2015-2022 Ford F-150,Only for Styleside 5.5' Feet Bed (67,1 inch)
  • Easy Installation, all required harness are included. No Drilling and Further modification. Installation manual included. 1 Pcs of Stick Touch Lamp Included
  • High Quality with 3 Mounting Point: Quad Fold Truck bed is made by double sided tear-resistant vinyl with 3 heavy duty aluminum powder coated frames. It has 4 horizontal crossbars to avoid air lifting issue.
  • Waterproof & UV resistant: This tonneau cover can be washed with soap and water, Keeps your equipment inside your bed dry.
  • Safety Guarantee with US Patent Clamp, Please measure your truck bed length and make sure you have the correct model before ordering!

4. BAK BAKFlip MX4 Hard Folding Truck Bed Tonneau Cover | 448339 | Fits 2021 - 2023 Ford F-150 (incl. Raptor/Lightning) 5' 7" Bed (67.1")

  • Fits 2021 - 2022 Ford F-150 5' 7" Bed (67.1") NEW! Precisely engineered for compatibility with Ford’s unique truck bed and its automatic tailgate feature
  • ULTIMATE SECURITY | The BAKFlip MX4 tonneau cover has durable aluminum panels that automatically latch as the cover is partially or fully closed, and is fully locked once your tailgate is closed
  • STYLISH MATTE FINISH | Featuring matte-finished aluminum panels, protecting against marks, scratches and UV damage; as well as premium upgrades to the perimeter seals and hardware
  • 100% BED ACCESS | Operate this cover closed, folded or flipped up, all without covering the 3rd brake light. Paired with a dual action tailgate seal for tailgate operation open or closed
  • WE’VE GOT YOUR BAK | The MX4 truck bed cover is rated up to 400 lbs of evenly distributed weight and is easy to install. This hard fold has a 5-year, hassle-free warranty, with a US-based support team

5. Xcover Low Profile Hard Folding Truck Bed Tonneau Cover, Compatible with 2015-2023 F150, 2022-2023 F150 Lightning Pickup 5.6Ft Bed

  • Fitment: Fit 2015-2023 F150, 2022-2023 F150 Lightning Pickup w/ 5.6ft Bed. Xcover is Low Profile and sit inside of truck bed, full stake pockets available to be used with the cover on.
  • Well Protect Your Cargos: Xcover Low profile Hard Tri-fold tonnneau cover is designed to perform in the most extreme conditions,premium UV resistant and cold resistant, no matter snowy, rainy, windy or sunny, your cargos on the bed will be well protected from moisture and dirt.
  • Unique Clamping System & Theft Protection: Patent pending rail and latch design, Xcover latch allows for one-finger release to open and locks automatically when you close the cover. Hard Panel is scratch resistant and provides maximum theft protection.
  • Durable & Easy Installation: Solid Core Hard Panels can be rated up to 500lbs of evenly distributed weight. Please see the video on the left for installation , it is completely assembled for easy No-Drilling installation in minutes. ATTENTION: Make sure the Flat Washer and Spring Washer are all placed on bolt before screw the plastic nut on. TIGHTEN ALL BOLTS & NUTS BEFORE DRIVING!
  • 5 Years Warranty: Against defects in materials and workmanship under its intended use, Please be assured to use our tonneau cover. Any bolts or mounting hardware need the replacement, any questions, please contact our customer service. WARNING: Always make sure the clamps and bolts are tightened before driving, never drive with a cover in partially opened position.

6. MaxMate Soft Roll Up Truck Bed Tonneau Cover Compatible with 2015-2020 Ford F-150 | Styleside 5.5' Bed (67") | TCF169029

  • US Design Patented
  • Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when cover is lying flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.
  • Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.
  • Easy no drilling installation with instruction and mounting hardware provided. | NOTE: Small holes will need to be cut in the bedliner for vehicles equipped with over-the-bedrail bedliner to secure the clamps for proper cover installation; cover will work with under-the-bedrail bedliner without modification.
  • 10-YEAR NO-HASSLE WARRANTY FOR US CUSTOMERS!

7. BAK BAKFlip MX4 Hard Folding Truck Bed Tonneau Cover | 448329 | Fits 2015 - 2020 Ford F-150 5' 7" Bed (67.1")

  • Fits 2015 - 2020 Ford F-150 5' 7" Bed (67.1")
  • ULTIMATE SECURITY | The BAKFlip MX4 tonneau cover has durable aluminum panels that automatically latch as the cover is partially or fully closed, and is fully locked once your tailgate is closed
  • STYLISH MATTE FINISH | Featuring matte-finished aluminum panels, protecting against marks, scratches and UV damage; as well as premium upgrades to the perimeter seals and hardware
  • 100% BED ACCESS | Operate this cover closed, folded or flipped up, all without covering the 3rd brake light. Paired with a dual action tailgate seal for tailgate operation open or closed
  • WE’VE GOT YOUR BAK | The MX4 truck bed cover is rated up to 400 lbs of evenly distributed weight and is easy to install. This hard fold has a 5-year, hassle-free warranty, with a US-based support team

8. DNA Motoring TTC-HARD-015 Truck Bed Top Hard Solid Tri-Fold Tonneau Cover Compatible with 15-20 F150 5.5Ft Fleetside Bed

  • Fitment: Dna Motoring Hard Tri-Fold Tonneau Cover Compatible With 15-20 Ford F150. This Upgrade Unit Perfect Fit With 2015 2016 2017 2018 2019 2020 With 5.5 Feet Fleetside Bed.
  • PLUG & PLAY: Easy to Install With Included Clamps. Adjustable Tension for the Perfect Fit. Less than 70 Lbs Weight to Help to Save Gas but Strong and Durable. No Need to Cut or Drill into the Truck Bed, the Preassembled Unit Making the Installation Easier than Ever. Note: Vehicles with a bedliner installed may require modifications to install this product.
  • Increase Speed & Save Gas: Increases Trucks Aerodynamics At Speed. Gas Saving Benefit From A Covered Bed. Locking Strap To Secure Cover While Folded Up And Driving.Rubberized Edges To Seal.
  • Durable Material: Black Powdercoated Aluminum Plating, Powerful Frames And Clamps Built To Support Unshakeable Stability, Double Layer Pvc And Uv Protection Available To Hold Up To 350Lbs.
  • Great Experience: Protect your Cargo from the Theft with this Premium Hard Tri-Fold Bed Cover. Bump Textured Surface, Hard Panel to Help Prevent Scratches & Dents for Superior Protection in Some Extreme Environments.

9. oEdRo Upgraded Tri-Fold Truck Bed Tonneau Cover Compatible with 2015-2023 Ford F-150 F150 5.6 Feet Bed, Styleside (Excl. Raptor Series)

  • PREFECT FIT: This tonneau cover is compatible with 2015 2016 2017 2018 2019 2020 2021 2022 2023 Ford F-150 (Excl. Raptor Series) | styleside 5.6' bed.
  • GREAT EXPERIENCE: OEDRO’s trifold truck bed tonneau cover gives your truck the perfect combination of security, convenience and appearance. It is easy to install and the tailgate lock turns your truck bed into a completely secure trunk which is snow proof and dust-proof
  • HEAVY DUTY MATERIAL: Being made of double layer PVC, OEDRO’s tonneau cover has been thoroughly tested for UV protection, good tensile properties. Pre-assembled powder coated rails and aluminum clamps are included for easy installation and great stability
  • EASY INSTALLATION: No extra tools are required and in most cases no drilling. Smooth and simple installation with the included instruction manual
  • All Around Protection: Please measure your truck bed size or contact us before buying. With the tailgate locking, your truck bed can be instantly converted into a 100% secure snow-proof and dust-proof trunk. Waterproof strips are included; The truck bed tonneau cover provides day and night security and all around protection.

10. LEER HF650M | Fits 2015-2022 Ford F-150 with 5.6 FT Bed | Hard, Quad-Folding, Low Profile Tonneau Cover | SKU 650112

  • FITS PERFECT/EASY TO LATCH – LEER’s industry exclusive CYNC latching system allows easily opening the cover with two fingers from either side of the truck bed. Latches with open or closed tailgate.
  • SLEEK LOOK – The patented HF650M Hard Folding Cover has a sleek, 12MM low-profile design with thinner rails, allowing for a true flush mount and more cargo space inside the bed.
  • FOUR LIGHTWEIGHT PANELS - The HF650M offers ultimate flexibility with four lightweight, durable, dent-resistant panels made of fiberglass reinforced plastic polymer. When opened, the quad-fold design keeps the third brake light and window visible and protects the back of your cab and window by locking into position away from the cab. 450 lbs. evenly distrusted load rating.
  • NO-DRILL INSTALLATION – With an easy and fast installation process, the HF650M comes with the tools and instructions to install your tonneau. This allows you the ability to easily take your cover off or put it back on.

Last update on 2023-04-01 / Affiliate links / Images from Amazon Product Advertising API

Add Comment