Best 4 Zone Amp 2024 - Top 10 Picks

This is the ultimate buyer's guide to finding the right 4 zone amp to suit your needs. We review the 10 best 4 zone amp on the market so you know that your next decision will be a smart one!

When you're trying to select the good 4 zone amp, there are a lot of factors to consider. This page has everything you need to know in one place.

This guide will help you avoid the pitfalls that come with researching 4 zone amp.

You don't have to try out every 4 zone amp to find one that meets your needs. After extensive research and hours of in-person tests, we've found the best 4 zone amp to be Rockville Home Matrix 4 Zone 8 Channel 600w Multi Room/Source Receiver/Amplifier. There are a lot of sub-par products out there, but this product is one of the highest quality you'll find. Next best option is Rockville ROCK MATRIX 4 Zone 70 Volt Commercial Amplifier+Matrix Source Routing.

Choosing the 4 zone amp can be a daunting task, especially if you're doing it for the first time. Here's what we recommend based on our extensive research. We've compiled a list of the highest rated 4 zone amp. The following products are some of the best you can get right now.

List of Top 10 4 Zone Amp

Review of Best 4 Zone Amp

1. Rockville Home Matrix 4 Zone 8 Channel 600w Multi Room/Source Receiver/Amplifier

  • What's in the Box: Matrix Amplifier. Remote. Detachable Rack mount ears. Power Cable. Owner’s manual. Warranty
  • Rockville HOME MATRIX 4 Zone 8 channel 600w RMS Multi Room/Multi Source Receiver/Amplifier. 600 Watts Total RMS @ less than 1 % THD (75 Watts RMS per zone x 8 Channel). Route Any Sources to Any Zones. Includes a remote with zone source and zone volume controls. Supports 4-8 ohm speakers. Bluetooth playback with quick phone connection and long range. USB input to play audio stored on a thumb drive with matrix assigning to any zone(s) (32gb max). RCA line input. Optical input.
  • Coaxial input. Built in FM radio. RCA output on each zone (4 sets total). 8 sets of amplified speaker outputs. 2 Mic inputs will play on all zones . Master volume control knob. Source selection on each zone . Bass, treble, and volume control on each zone. Mic inputs have volume control, bass, treble, echo, and delay controls. 19" rack mountable (removable rack brackets). MIC priority button will lower the music when talking into the mic when priority is activated.
  • Built in variable speed fan cooling system keeps component cool at all times. 110/220V switchable. Frequency Response vs THD + N (Worst case, across normal bandwidth 1w @ 8ohm) : <1%. Weight: 20.9 lbs.. Dimensions with the included rack mount ears attached: 19” x 3.5” x 10.4” inches. Dimensions without rack mount ears: 16.9” x 3.5” x 10.4”.
  • Applications: Multi room home audio. Offices. Restaurant. Bar. School

2. Rockville ROCK MATRIX 4 Zone 70 Volt Commercial Amplifier+Matrix Source Routing

  • What's in the Box: Matrix Amplifier. Remote. Detachable Rack mount ears. Power Cable. Owner's manual. Warranty. Inputs and Outputs: (2) Sets RCA AUX inputs. (4) XLR Mic inputs. (2) 1/4" TS inputs. (4) 1/4" TRS LINE outputs (one per zone) (allows you to add another amplifier or a powered sub to any zone that needs more speakers/subs). Fire input. Siren input. Each zone has speaker output terminals with options for 4 ohm, 8 ohm, 16 ohm, 70v, 100v output
  • Rockville ROCK MATRIX 4 Zone 70 Volt Commercial Amplifier. 440 Watts Total RMS @ less than 1 % THD (110 Watts RMS per zone x 4 Zones). Route Any Sources to Any Zones. 4 separate zone output and you can route any source to any zone and also route a microphone input to specific zone(s). Supports multi zone installations using 70 volt, 100 volt, 16 ohm, 8 ohm, and 4 ohm speaker set ups.
  • 4 line/mic inputs (2 of the mic inputs have selectable phantom power for condenser mics). 19" rack mountable (removable rack brackets). Built in 1w monitor speaker allows you to listen to playback on any zone. 100 volt RMS Power: 4 x 110 Watts RMS. 70 volt RMS Power: 4 x 110 Watts RMS. 4 ohm RMS power: 4 x 110 Watts RMS. 8 ohm RMS power: 4 x 110 Watts RMS. 16 ohm RMS power: 4 x 110 Watts RMS.
  • Built in Bluetooth 5.0 chip allows audio streaming with matrix assigning to any zone(s). USB input to play audio stored on a thumb drive with matrix assigning to any zone(s) (32gb max). SD card slot to play music stored on an SD Card with matrix assigning to any zone(s) (32gb max). Separate volume control for MIC1/LINE1, MIC2/LINE2, MIC3/Line3,MIC4/LINE4/MP3 inputs. BASS and Treble controls. Built in limiter and clipping indicator.
  • MIC 1 priority button will lower the music when talking into the mic when priority is activated. 6 segments signal level indication (-10dB, -6dB, -3dB, 0dB, limit, clip). Built in fan cooling system keeps component cool at all times. Built in 1/4" fire input will override the system when activated in case of emergencies. Siren output allows you to connect a siren that would get activated in case of an emergency. Emergency DC 24V input terminals allow you to connect a 24V battery to power the amp in case of a power outage

3. OSD Audio 4 Zone 8-Channel Digital Amplifier, 80W/Channel, Distributed Audio & Home Theater - MX880

  • HIGH-PERFORMANCE AMPLIFIER: A slim yet robust multi-channel amplifier that supplies reliable power to up to four zones
  • RESIDENTIAL/COMMERCIAL: Can be configured as the main amplifier for an audio distribution system or as an amplifier for 5.1 or 7.2 home theater systems
  • AUDIOPHILE-LEVEL AMPLIFICATION: Delivers high-resolution music playback with 80 Watts per channel (1KHz into 4 Ohms), 50W Watts per channel (1KHz into 8 Ohms)
  • CLASS D EFFICIENCY: Uses Class D amplifier technology for low distortion and higher efficiency and special protection circuitry safeguards from thermal overload and short circuits
  • SLIM DESIGN: Includes front-panel status indicators and slim form factor that is 2U rack-mountable (hardware included)

4. Donner Bluetooth 5.0 Stereo Audio Amplifier Receiver, 4 Channel 1000W Max Power Home Theater Stereo Receiver with USB, SD, FM, 2 Mic in Echo, RCA, LED, Speaker Selector for Studio, Home - MAMP5

  • 【1000 Watt max power Independent Control】Donner Bluetooth Stereo Audio Amplifier has 4 CHANNELS which is independently controlled. It gives you 1000W max power which can be used for 4 groups of 8 speakers with 4-8 ohms impedance allowing you to enjoy high quality audio.
  • 【Multiple Input Modes】In addition to the Bluetooth function, you can enjoy a range of audio sources including USB (Maximum 32G), SD card (Maximum 16G), 2 pairs RCA audio inputs for for CD player and DVD player, 2 1/4 inch(6.35mm) microphone inputs, 3.5mm AUX IN, and FM radio with our home theater receiver bluetooth amplifier. Supports treble and bass adjustment and microphone volume control.
  • 【Bluetooth 5.0】The professional integrated indoor stereo receiver is equipped with the new updated 5.0 bluetooth. It will increase the stability, sound quality and use distance. Stay connected up to 40+ feet/ 10 meters away and it works with latest devices including smartphone, tablet, laptop, computer, etc.
  • 【Dual Mic Interfaces】Take hosting to the next level with the flexibility of dual 1/4'' microphone jacks. Customize your karaoke nights, events, or presentations w/ independent controls of our home stereo receiver bluetooth amp.
  • 【HD LED SCREEN】The integrated receiver for home stereo has a built in LED display. FM Antenna and Remote Control are included in the stereo amplifier package for distant audio adjustments. (Notice: The product needs to be connected to passive speakers to play audio. When there is no speaker connected, there will be a certain amount of wind noise, which is normal.) Remote control can ONLY remotely control the volume of MP3/BT/FM.

5. Monoprice SSVC-4.1 Single Input 4-Channel Speaker Selector with Volume Control, Impedance Protection, Individual Zone On/Off Buttons, Black, Model Number: 138159

  • Connect and safely control multiple speaker pairs with a single amplifier. Automatic impedance protection circuitry.
  • 100 watts/channel continuous power handling capacity, 200 watts/channel peak. 5-ohm minimum amplifier impedance with four 4-ohm speakers selected, 6-ohm minimum with 8-ohm speakers.
  • Individual zone on/off buttons and volume controls.
  • Heavy-duty screw-type connectors supporting 12-18 AWG speaker wire.
  • Isolated left/right circuit grounds provide safe connection for amplifiers with floating grounds or bridged configurations. Accurate, noise-free switching.

6. Pyle Bluetooth Home Audio Theater Amplifier Stereo Receiver 4 Channel 800 Watt Sound System w/MP3, USB, SD, AUX, RCA, FM,MIC, Headphone, Reverb Delay, LED Vol, for Home/Studio/Theater Speakers

  • EXCEPTIONAL 800W POWER - Elevate your audio experience to extraordinary levels with an impressive 800W peak power amplifier. Immerse yourself in the world of dynamic sound, where every movie, music, and gaming session becomes a captivating journey.
  • SEAMLESS BLUETOOTH 5.0 CONNECTIVITY - Effortlessly connect/stream from your devices with the latest Bluetooth technology of our bluetooth stereo receiver. Stay connected up to 30+ feet away & enjoy music from phones, tablets, laptops, & more.
  • DUAL MIC INPUTS FOR LIMITLESS UTILITY - Take hosting to the next level with the flexibility of dual 1/4'' microphone jacks. Customize your karaoke nights, events, or presentations w/ independent controls of our home stereo receiver bluetooth amp.
  • VERSATILE AUDIO SOURCES - Enjoy a range of audio sources including USB, SD cards, and FM radio with our home theater receiver bluetooth amplifier. Connect external devices like gaming consoles, DVD players, & more through AUX, RCA, and 3.5mm inputs.
  • INTUITIVE FRONT PANEL CONTROL CENTER - Master your sound effortlessly with the user-friendly front panel control center & digital LED display of our bluetooth receiver. Make precise adjustments to tailor the audio to your preferences.

7. Pyle 500W Karaoke Wireless Bluetooth Amplifier - 4 Channel Stereo Audio Receiver with AUX IN, FM Radio, RCA Subwoofer Speaker OUT, USB, Microphone IN with Echo, 500W Peak Power into 4-8 OHMS - PTA44BT

  • 500 WATT POWER: The Pyle 4 Channel Bluetooth Home Audio Amplifier is perfect for your PA and home theater entertainment. It gives you 500W peak power which can be used for multi speakers with 4-8 ohms impedance allowing you to enjoy high quality audio
  • BLUETOOTH COMPATIBLE: The professional integrated indoor house stereo receiver is equipped with bluetooth wireless music streaming. Works with today’s latest devices including smartphones, tablets, laptops and computers with hassle free receiver pairing
  • 7 INPUTS: The personal portable digital amp box supports iPod or MP3, USB, micro SD, AUX playback, built in FM radio with digital LCD display, audio input and REC, plus subwoofer output RCA (L/R) connectors, 2 ¼” microphone inputs with echo
  • TALK OVER BUTTON: The compact speaker amplifier features a MIC talk over function which, when activated, the current music or audio being played will be temporarily halted. This function is used in paging, voice over, and announcements
  • EQ CONTROLS: The sound amplifying device has crisp buttons for the audio sources and selectors, rotary knob for equalization, mic and master volume adjustments. A remote control is also included in the package for distant audio adjustments

8. Rockville RCS180-6 180 Watt 6 Zone 70V Commercial/Restaurant Amplifier/Bluetooth

  • Rockville RCS180-6 180 Watt 6 zone 70V commercial/restaurant amplifier/Bluetooth
  • Rockville rcs180-6350 watt commercial/restaurant amplifier 19" Rack mountable (removable rack brackets) digital hybrid amplifier/receiver. Capable of 70 volt, 100 Volt, 8ohm, and 4 ohm. 70/100 volt RMS power: 184 watts. 4-16 ohm binding post speaker output.
  • 6-Zones of speaker outputs - each zone has a separate volume control. 70 and 100 volt binding post outputs for single zone playback of all 180 watts. Built in Bluetooth Audio streaming. Fm radio tuner. Usb input to play audio stored on a thumb drive (32GB max).
  • (2) sets RCA aux inputs. (3) mic inputs. Rca line output. 100V speaker red positive speaker output terminal. 70V speaker red positive speaker output terminal. 8 ohm red positive speaker output terminal. Shared negative speaker output terminal
  • Power requirements: 120V/ 50-60Hz. A weighted signal to noise (@ 1W) -68.1Dba. A weighted signal to noise (referenced to full 4 ohm power) -89.2Dba. Frequency response: 49Hz to 14.9 kHz. Frequency response VS thd+m (worst case across normal bandwidth 1W @ 8 ohms: 0.89%. weight: 22.7lbs. Dimensions: 19” x 16” x 4” inches

9. Pyle 4 Channel Speaker Selector Switch-Multi Zone A B Speaker Distribution Controller Box w/Independent Audio Source Volume Control,Supports Home Theater Stereo Amplifier Receiver System-PSLSW4,Black

  • 100 WATT MAX: The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
  • CONTROL 4 SPEAKERS: The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
  • INDEPENDENT AUDIO CONTROL: Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair
  • EASY SETUP: Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
  • OVERLOAD PROTECTION: Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability

10. OSD Nero Control12 6 Zone App Control Matrix Multi Room Controller, iOS and Android

  • WHOLE-HOME AUDIO EXPERIENCE – Seamlessly play any of six sources across up to six rooms, with the ability to expand coverage up to 18 rooms for a comprehensive, immersive music experience throughout your entire home.
  • DIVERSE INPUT OPTIONS – Equipped with four stereo line-level L&R RCA analog source inputs, a dedicated 3.5mm analog input, and an optical/3.5mm combination source input, this device caters to all your audio source needs.
  • VERSATILE PRE-AMP OUTPUTS – Features six stereo line-level pre-amp L&R RCA outputs (zones 1-6), providing flexible connectivity options with multichannel power amplifiers to enhance your audio output experience.
  • INTERACTIVE KEYPAD CONTROL – Optional control keypads offer built-in IR receivers for each zone, granting you an intuitive control interface for volume and source selection, enhancing the user experience.
  • CONVENIENT REMOTE CONTROL – Includes an IR remote as part of the optional control keypad kit, complemented by a Cat5e network cable hub, ensuring optimal control and flexibility for your multi-room audio setup.

Last update on 2024-04-27 / Affiliate links / Images from Amazon Product Advertising API

Add Comment