Best Pto Tiller 2024 - Top 10 Picks

This is the ultimate buyer's guide to finding the right pto tiller to suit your needs. We review the 10 best pto tiller on the market so you know that your next decision will be a smart one!

When you're trying to select the good pto tiller, there are a lot of factors to consider. This page has everything you need to know in one place.

This guide will help you avoid the pitfalls that come with researching pto tiller.

You don't have to try out every pto tiller to find one that meets your needs. After extensive research and hours of in-person tests, we've found the best pto tiller to be Titan Attachments 48in PTO Driven Rotary Tiller, Category 1, 3 Point Hitch, Single Speed Gear Drive, L-Shaped Tines Work 5in Deep. There are a lot of sub-par products out there, but this product is one of the highest quality you'll find. Next best option is Sigma Heavy Duty 3 Point Hitch Rotary Tiller 7' FT 84" in. Work with 3 PT CAT I Hitch Tractor PTO Driven Gear Drive with PTO Shaft.

Choosing the pto tiller can be a daunting task, especially if you're doing it for the first time. Here's what we recommend based on our extensive research. We've compiled a list of the highest rated pto tiller. The following products are some of the best you can get right now.

List of Top 10 Pto Tiller

Review of Best Pto Tiller

1. Titan Attachments 48in PTO Driven Rotary Tiller, Category 1, 3 Point Hitch, Single Speed Gear Drive, L-Shaped Tines Work 5in Deep

  • Fits Category 1, 3 Point Tractors
  • Single speed used for small farms, fruit and vegetables, orchards, gardening and nurseries
  • Heavy-duty PTO shaft with shear bolt
  • L-shaped blades loosen and aerate soil up to 5" deep
  • Five adjustable ski height settings

2. Sigma Heavy Duty 3 Point Hitch Rotary Tiller 7' FT 84" in. Work with 3 PT CAT I Hitch Tractor PTO Driven Gear Drive with PTO Shaft

  • Brand New High Quality Sigma Brand 3 Point Hitch Rotary Tiller 7' FT 84" With PTO Shaft and Heavy duty cast iron gear box
  • Working Width: 7' Depth of Cut: 6" Max
  • Hard Carbon Steel Tine construction:Total Number of Tines: 66
  • Recommended PTO HP: 45-60 Hitch Requirement: Cat. I
  • Standard Replaceable Skid Shoe Kits with Parking Stand Gear box shipped dry. Gear oil needed for proper operation. See owner’s manual for specifications

3. PTO Drive Line, General Purpose, Finishing Mower, Tiller, 1-3/8" x 6 Spline to 1-3/8" Round, 30" - 38", Series 4

  • PTO Drive Line
  • Series 4
  • Fits Generally Tillers and Finish Mowers, But is General Purpose
  • Implement End: 1-3/8" Round, Tractor End: 1-3/8x6 Spline Quick Disconnect
  • Compressed Length: 30"; 38" Max Recommended Operating Length (Calculated with 1/3 shaft overlap)

4. Sigma Heavy Duty 3 Point Hitch Rotary Tiller 6' FT 72" in. Work with 3 PT CAT I Hitch Tractor PTO Driven Gear Drive with PTO Shaft

  • Brand New High Quality Sigma Brand 3 Point Hitch Rotary Tiller 6' FT 72" With PTO Shaft and Heavy duty cast iron gear box
  • Working Width: 6' Depth of Cut: 6" Max
  • Hard Carbon Steel Tine construction:Total Number of Tines: 54
  • Recommended PTO HP: 35-50 Hitch Requirement: Cat. I
  • Standard Replaceable Skid Shoe Kits with Parking Stand Gear box shipped dry. Gear oil needed for proper operation. See owner’s manual for specifications

5. Rotary-Tiller PTO Shaft with Friction Clutch replacement King Kutter 147122

  • Universal design: The Jeremywell Series 4 PTO shaft is a standard size with a diameter of 1-3/8”, consisting of a 1-3/8 6 spline tractor end, and a 1-3/8 6 spline implement end with a quick disconnect, making it the perfect fit for powered farm equipment of the same size.
  • Wide application: Measuring 34” when retracted, and a 44” extended length, this PTO shaft is designed for use with a wide range of agricultural applications. Fits 5’,5-1/2’ and 6’ King Kutter Finish Mowers; Can trim to 29.375"
  • Powerful transmission force: This Jeremywell PTO shaft delivers superior power transfer ability. At 540rmp it can provide 35hp, and at 1000rpm it can provide 53hp.
  • Simple and quick installation: Easily install this PTO shaft to your application by attaching the connecting ends to the corresponding tractor end and implement end, should you want to cut to your desired length please read manual for further instructions.
  • Shielding for your protection: The series 4 PTO shaft is equipped with 2 friction disc slip clutch that allows for rapid release to prevent damage to your valued applications, along with a plastic shield and security chain for a safe and danger-free process.

6. POWER PRODUCTS 3-Point Tiller Slip Clutch PTO Shaft for Rural King Country Way Sigma Rotary Tiller for ASC Rotary Tiller 77709 77710 77711 1-3/8×6 QR 1-3/8 RND 6 Spline Both Ends 32″-40″ Inch Long

  • Tractor End 1-3/8" x 6 Spline
  • Implement End 1-3/8" x 6 Spline
  • Compressed Length: 32" ( With the Friction Clutch)
  • Extended Length: 40" ( With the Friction Clutch)
  • Please note that you can DIY cut the shaft short if you need a shaft less than 32" Long

7. Farmer Helper 53" Adjustable Offset 3 pt Rotart Tiller FH-TL135 Cat.I 3pt 20+hp~Slip Clutch Driveline Requires a Tractor. Not a standalone Unit.

  • Cat I 3-Point 6-spline slip clutch driveline
  • 2 year warranty
  • Designed for subcompact tractors
  • Maintenance free oil bath transmission
  • Right hand offset, covering tire tracks

8. EARTHQUAKE 31285 Pioneer Dual Direction Rear Tine Tiller with Instant Reverse, Airless Wheels, 17" Width, 11" Tilling Depth, 99cc 4-Cycle Viper Engine, Black/Red

  • DUAL DIRECTION- Operate in CRT mode (counter rotating tines) to bust sod and till tough soils, then shift to SRT (standard rotating tines) to create a smooth seed bed for planting.
  • FRUSTRATION FREE SHIFTING- Pioneer removes the guesswork from getting in gear with a shift positioning system that other dual direction tillers envy. No fuss, no cuss, no back and forth… easily find the drive mode you want by simply sliding the shift handle into your preferred mode on the locator plate.
  • COMPACT POWER- Designed for performance, the Pioneer uses a lighter and quieter 99cc Viper engine that is right-sized for the job reducing the weight and offering a smoother, less noisy and more balanced experience during operation.
  • INSTANT REVERSE- Unlike its competitors, Pioneer takes the “shift” out of backing up. Seamlessly maneuver backward in your garden with the quick pull of a handle. Release the handle to go forward again.
  • AIRLESS WHEELS- Not only will the super-wide airless wheels never go flat, they have seriously aggressive lugs for clawing at the dirt for maximum traction.

9. Farmer Helper 71" Tiller Heavy Duty Cat.I 3pt 25hp+ Rating (FH-IGN180) w/SlipClutch Driveline Requires a Tractor. Not a standalone Unit.

  • Overrunning Gearbox rated to 65 horsepower
  • 5 Skid Depth Adjustment 2” up to 8" Deep
  • Slip Clutch PTO Driveline included
  • Will attach to all tractor brands with standard Cat-I hitch
  • Over 10,000 implements delivered to internet customers. Less than 0.01% return ratio.

10. 8" PTO Wood Chipper Tree Shredder 3 Point Farm Tractor Implement - with Auto Feed

  • 【BELT DRIVEN GEAR BOX AND DRIVE AXLE SYSTEM】: The in-feed system on the WC-8M utilizes a belt-driven oil bath heavy-duty gearbox that increases torque and transfers power to the upper feed roller through an extreme-duty drive axle. For long life. the drive axle is machined splined (similar to the PTO spline of your tractor), and the U-joints are protected from debris by a rubber boot. The clutch mechanism is precisely machined from solid steel to ensure proper function. This in-feed system will feed material at a rate of 58 ft./min.
  • 【EASY SWIVEL DISCHARGE CHUTE】:360 degrees of rotation and 2-finger operation. We have incorporated a convenient handle that effortlessly allows you to swivel the discharge chutes that you can direct the chips into the back of a truck or trailer without having to move the entire machine. Simply push down on the handle and swing the chute. When you release the handle a spring-loaded pin drops down to lock the chute into position. No tools re quired.
  • 【SAFETY AUTO-FEED STOP BAR】:Safety is paramount on our chippers. Located on the top of the in-feed bin, the WC-8M chipper utilizes an easy-to-activate auto-feed stop safety bar to disengage the in-feed rollers in case of an emergency or to clear the in-feed bin if necessary. This safety bar can be actuated and left in the theoffposition, hands-free. so that the operator can use both hands to clear their-feed bin. This feature is safer because it allows the user to start the chipper without the feed rollers turning. Other chippers require a hand on the safety bar to keep the feed rollers in the off position.
  • 【HANDY FEED ROLLER ASSIST HANDLE LOCATED ON TOP OF MACHINE】:This feature allows the user to access the handle from either side of the machineThe center lift point allows the WC-series chipper to use stron ger tension springs, increasing the in-feed ability.
  • 【WIDE FOOTPRINT SKID TYPE SUPPORT BASE】:Because of its robust weight and to prevent the machine from sinking into the soft ground during operation, the new WC-8M offers a wide footprint skid type support base. This base is angled upward on the end to prevent digging into the ground while transporting.

Last update on 2024-07-15 / Affiliate links / Images from Amazon Product Advertising API

Add Comment