Best Class D Mono Amp 2024 - Top 10 Picks

This is the ultimate buyer's guide to finding the right class d mono amp to suit your needs. We review the 10 best class d mono amp on the market so you know that your next decision will be a smart one!

When you're trying to select the good class d mono amp, there are a lot of factors to consider. This page has everything you need to know in one place.

This guide will help you avoid the pitfalls that come with researching class d mono amp.

You don't have to try out every class d mono amp to find one that meets your needs. After extensive research and hours of in-person tests, we've found the best class d mono amp to be PIONEER 500W Mono Class D AMP 13in. x 10.75in. x 4.5in.. There are a lot of sub-par products out there, but this product is one of the highest quality you'll find. Next best option is Car Audio Amplifier ZE1000.1 2000W Monoblock Class D MOSFET Subwoofer Audio, 1-4 Ohm Stable, Low Pass Crossover, Mosfet Power Supply, Stereo.

Choosing the class d mono amp can be a daunting task, especially if you're doing it for the first time. Here's what we recommend based on our extensive research. We've compiled a list of the highest rated class d mono amp. The following products are some of the best you can get right now.

List of Top 10 Class D Mono Amp

Review of Best Class D Mono Amp

1. PIONEER 500W Mono Class D AMP 13in. x 10.75in. x 4.5in.

  • 300W RMS x 1 @ 4Ω
  • 500W RMS x 1 @ 2ω
  • 800W RMS x 1 @ 1ω
  • Free rasp: 10hz–240khz
  • Signal-to-noise ratio: 100dB

2. Car Audio Amplifier ZE1000.1 2000W Monoblock Class D MOSFET Subwoofer Audio, 1-4 Ohm Stable, Low Pass Crossover, Mosfet Power Supply, Stereo

  • Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • To keep both your car and the stereo amp safe, this ZE1000.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality sound in a sturdy form factor
  • Specs - Dimensions: 11” x 6.9” x2”, Weight 6.6 lbs.

3. Orion Cobalt CBT2000.1D Monoblock 1-Channel Class D Amplifier for Car Subwoofer, 2000W Max, 1-Ohm Stable, Adjustable Low Pass & Subsonic Filter with Bass Boost, MOSFET Power Supply, Bass Knob Included

  • COBALT SERIES: Introducing our Class D Monoblock Amplifier, boasting exceptional frequency response rates and a cutting-edge crossover network, elevating its status among competitors. Its robust construction and unparalleled efficiency ensure a standout performance in the realm of mono sub amplifiers.
  • PERFORMANCE: Engineered to effortlessly power car speakers with a continuous 1 Ohm load, ensuring seamless performance devoid of overheating or extraneous noise. This amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively
  • QUALITY: This monoblock subwoofer amplifier for car stereo speakers with MOSFET power supply comes with low/high-level inputs. A low-level (RCA) input is measured in voltages. A high-level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • FEATURES: The monoblock bass boost amplifier has features like - Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control, Remote Bass Knob, MOSFET Power Supply, Thermal Protection, Phase Shift. The ultimate powerhouse for your audio needs.
  • POWER: The Cobalt CBT2000.1D amplifier has a power rating distribution of 2000 Watts x 1 Chanel x 1 Ohm. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.

4. Amplifier car Audio Monoblock Class D Compact Subwoofer Amplifier, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply

  • Car audio amplifier 450 watts RMS at 2-ohm load (14.4v); 300 watts RMS at 4-ohm load (14.4v);
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 2-4 Ohm Stable - Able to continuously power loads of 2-4 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
  • MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists

5. Kicker 46CXA4001 CXA4001-400-Watt Mono Class D Subwoofer Amp

  • CX-Series Amplifiers are the perfect combination of big power, bigger flexibility and true reliability!
  • A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love.
  • Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!
  • CX-Series amps include vertical and horizontal mounting hardware, so you can show off your install style!
  • These powerful amps work with as little as nine volts of power from your battery, and as much as 40 volts (400 watts) of speaker-level input signal.

6. Rockville Rxd-m0 1200 Watt/600W RMS Mono Class D 1 Ohm Amplifier Car Audio Amp

  • Rockville RXD-M0 1200 Watt / 600 Watt RMS Mono Class D 1 Ohm Car Stereo Amplifier with Optical Coupler Technology. CEA Compliant Power Ratings : (Rated at less than 1 % distortion)
  • 1 Ohm : 300 Watts x 1 Channel <1% THD+N . 2 Ohm : 200 Watts x 1 Channel <1% THD+N. 4 Ohm : 150 Watts x 1 Channel <1% THD+N . RMS Power Ratings : (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc)
  • 1 Ohm : 1200 Watts x 1 Channel . 2 Ohm : 800 Watts x 1 Channel. 4 Ohm : 600 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Studio-Grade Bipolar Output Stage Transistors .
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter : 50Hz - 250Hz. Subsonic Filter : 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control.
  • 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power : < 0.05%. S / N Ratio : >100dB. Frequency Response : 10Hz - 500KHz. Damping Factor : > 200 @ 100Hz. 50 Amp Maxi Fuse. Dimensions : (W x H x L) 8.5" x 1.8" x 12.5".

7. Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W

  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150<
  • Stable at 1 ohm | Remote Subwoofer Level Control Included

8. Power Acoustik RZ1-1500D 1500W Class D Monoblock Amplifier, Black

  • 1500-Watt max power, 600-Watt RMS at 4-ohm, 900-Watt RMS at 2-ohm
  • 2-Ohm stable class D Monoblocks
  • MOSFET PWM power supply

9. Orion Cobalt CBT-3000.1D Amplifier 1 OHM Monoblock Class D 3000 Watt max Music Power car Audio amp

  • By Orion High Performance Car Audio
  • CBT3000.1D Cobalt Series 1-Channel Monoblock Class D Amplifier
  • Watts @ 1 Ohm Mono 14.4V: 900W
  • Max Music Peak Power: 3000W
  • Frequency Response: 10Hz-250Hz(-3dB)

10. Kicker 46CXA8001 CXA8001-800-Watt Mono Class D Subwoofer Amp

  • CX-Series Amplifiers are the perfect combination of big power, bigger flexibility and true reliability!
  • A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love.
  • Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!
  • CX-Series amps include vertical and horizontal mounting hardware, so you can show off your install style!
  • These powerful amps work with as little as nine volts of power from your battery, and as much as 40 volts (400 watts) of speaker-level input signal.

Last update on 2024-03-28 / Affiliate links / Images from Amazon Product Advertising API

Add Comment